 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| CD 261X QX Series 7 000 - 12 000h at 105C * Extra high Ripple Current * Down sized * Electronic Ballast, Lighting CD 11G GW 125C CD 261X QX highest currents CD 261 LK longest life CD 262 QM Item Operating Temperature Range (C) Voltage Range (V) Capacitance Range (F) Capacitance Tolerance (20C, 120Hz) Leakage Current (A) Characteristics -25 ~ +105 160 ~ 450 1,0 ~ 220 20% After 1 minute at 20C application of rated voltage, leakage current is not more than 0,04CV + 100. C: Nominal Capacitance (F) V: Rated Voltage (V) Rated Voltage (V) 160 200 0,10 20 0 00 0,12 0 Radial Dissipation Factor (20C, 120Hz) Tan(max) Stability at Low Temperature (Impedance Ratio at 120Hz) Rated Voltage (V) 160 200 3 20 0 00 6 0 Z -25C / Z +20C Useful Life O O O O 10x12, : 7 000h 10x16 ~ : 10 000h >100 000h 10x20 12 : 12 000h Load Life O 10x12,5 : 5 000h O 10x16 ~ : 8 000h O 10x20 O 12 : 10 000h Not more than specified value Within 30% of initial value Not more than 300% of specified value UR IR 105C guaranteed Endurance Test O 10x12,5 : 4 000h O 10x16 ~ : 6 000h O 10x20 O 12 : 8 000h Not more than specified value Within 20% of initial value Shelf Life Lifetime 1 000h Not more than specified value Within 20% of initial value Leakage Current Capacity Change Dissipation Factor Condition: Applied Voltage Applied Current Applied Temperature Failure Rate Level Not more than specified value Within 50% of initial value Not more than 500% of specified value Not more than 200% of Not more than 200% of specified value specified value UR IR = 0 105C UR = 0 IR = 0 105C After test: UR to be applied for 30min >24h before measurement UR IR 105C 1% Failure Rate UR 1,6 x IR 50C 1% Failure Rate Multiplier for Ripple Current Frequency Coefficient 2.5 Lifetime Diagram 50Hz 0,35 120Hz 0,50 1kHz 0,85 10kHz 0,90 100kHz 1,00 Frequency Coefficient IA --- 2.0 CD 261X QX Series IR 1.5 1.0 0.5 X32 Lifetime Multiplier X16 X8 X4 X2 X1 0.0 40 50 60 70 80 90 100 110 TA (C) IA = actual ripple current at 100kHz, IR = rated ripple current at 100kHz, 105C Multiplier of Useful Life as a function of ambient temperature and ripple current load 22 Direct Contact & Support: Jianghai Europe GmbH +49 (0)2151-652088-0 info@jianghai-europe.com www.jianghai-europe.com v2006.2 CD 261X QX Series Ratings for CD 261X QX Series VDC (Surge Voltage) Code (V) Max ESR Typ ESR Rated Capacitance 20C, 120Hz 20C, 120Hz Max Ripple Current 105C, 100kHz (mArms) 320 500 650 750 1 180 1 180 1 420 1 420 1 890 2 370 200 220 320 500 650 980 1 300 1 300 1 420 1 890 200 250 320 500 800 980 1 300 1 530 1 940 100 140 180 220 250 280 350 650 900 1 080 1 470 Size ODxL VDC (Surge Voltage) Code (V) Max ESR Typ ESR Rated Capacitance 20C, 120Hz 20C, 120Hz Max Ripple Current 105C, 100kHz (mArms) 70 100 140 180 220 250 280 350 550 760 760 900 1 180 1 470 150 180 220 250 280 450 600 730 980 1 200 Size ODxL (F) 10 22 33 47 () 13,3 6,0 4,0 2,8 2,0 2,0 1,3 1,3 0,90 0,60 28,2 19,5 13,3 6,0 4,0 2,8 2,0 2,0 1,3 0,90 28,2 19,5 13,3 6,0 4,0 2,8 2,0 1,3 0,90 106 72,4 48,3 33,9 28,4 23,4 15,9 7,2 4,8 3,4 2,3 () 7,0 3,5 2,5 1,7 1,1 1,1 0,70 0,70 0,48 0,32 15,0 10,5 7,0 3,2 2,2 1,5 1,1 1,1 0,70 0,48 15,0 10,5 7,0 3,2 2,2 1,5 1,1 0,70 0,48 60,0 41,0 28,0 19,0 16,0 13,0 9,0 4,1 2,7 1,9 1,3 (mm) 10 x 16 10 x 20 10 x 20 10 x 20 12,5 x 20 16 x 20 12,5 x 25 16 x 20 16 x 25 18 x 25 10 x 12,5 10 x 16 10 x 16 10 x 20 10 x 20 12,5 x 20 12,5 x 25 16 x 20 16 x 20 16 x 25 10 x 12,5 10 x 16 10 x 16 10 x 20 12,5 x 20 12,5 x 20 16 x 20 16 x 25 18 x 25 10 x 12,5 10 x 12,5 10 x 12,5 10 x 16 10 x 16 10 x 20 10 x 20 12,5 x 20 16 x 20 16 x 20 18 x 25 (F) 1 1,5 2,2 3,3 4,7 5,6 () 160 107 72,4 48,3 33,9 28,4 23,4 15,9 10,6 7,2 7,2 4,8 3,4 2,3 72,4 48,3 33,9 28,4 23,4 15,9 10,6 7,2 4,8 3,4 () 60,0 40,0 27,0 19,0 13,5 11,5 9,5 6,4 4,3 2,9 2,9 1,9 1,4 0,90 29,0 19,0 13,5 11,5 9,5 6,5 4,3 2,9 1,9 1,4 (mm) 10 x 12,5 10 x 12,5 10 x 12,5 10 x 16 10 x 16 10 x 20 10 x 20 10 x 20 12,5 x 20 12,5 x 25 16 x 20 16 x 20 16 x 25 18 x 25 10 x 16 10 x 16 10 x 20 10 x 20 10 x 20 12,5 x 20 12,5 x 25 16 x 20 16 x 25 18 x 25 160 (200) 2C 68 100 150 220 4,7 6,8 10 22 400 (450) 2G 6,8 10 15 22 33 47 68 2,2 3,3 4,7 5,6 200 (250) 2D 33 47 68 100 150 4,7 6,8 10 22 33 47 68 100 150 1,5 2,2 3,3 4,7 5,6 6,8 10 22 33 47 68 450 (500) 2W 6,8 10 15 22 33 47 250 (300) 2E 350 (400) 2V Custom products are available on request. Direct Contact & Support: Jianghai Europe GmbH +49 (0)2151-652088-0 info@jianghai-europe.com www.jianghai-europe.com v2006.2 2 Radial Part Number System Order Code SMD, Radial, Snap-In EC Technology EC = Electrolytic Capacitor PC = Polymer Capacitor R Terminal Type SMD Radial =V =R 1C Rated Voltage Code For coding please refer to the pages of ratings PT Series Code CD VS CD VH CD VZ CD 261 CD 262 CD 26 CD 269 CD 281 CD 28 CD 287 CD 28L CD 29 CD 29 CD 29 CD 296 CD 297 CD 299 101 Capacitance Code (in F) 1,0 = 010 100 = 101 1 000 = 102 M Capacitance Tolerance = M SMD: =K Taped FF Lead Form 2 Terminal/ Pitch Size = FF 0611 Dimension 4x7 = 0407 = 0511 = 3580 JE xxxxx for Specials only = BS = VH = VZ = LK 0,47 = R47 20% 10% Terminal = T2 2,0mm 2,5mm 3,5mm 5,0mm 7,5mm = 20 = 25 = 35 = 50 = 75 5x11,5 35x80 Snap-In = S 2,2 = 2R2 +30 / -10% = Q +50 / -10% = T Radial: Long Lead = LL 6,3x11,5 = 0611 = CB = CC CD 261X = QX Cut 5,0mm Cut ,mm 45x100 = 45100 = QM 10 000 = 103 = BK = PH = LL = XY = GC = QL = BZ = BW = BC = KC = BB = PG Cut 4,0mm Cut 3,5mm Cut 3,0mm = CD = CE = CF 10,0mm = 10 12,5mm = 12 on request: alternative lead forms (axial, 90 - angle, others) Snap-In: 4,0mm Pin Length Soldering Pin preferred = T4 = S4 2 Pin 3 Pin 4 Pin 5 Pin = P2 = P3 = P4 = P5 6,mm Pin Length = T6 CD 29D = HR CD 29H = QH CD 29L HCP HPM HVC = QL = CP = PM = VC Technical Specification SMD Type Dimensions O DxL x , x , 6, x, 6,x 7,7 8 x 10, 8 x 11,8 10x10, 10x12,7 A B C E L W 1,8 4,3 4,3 1,0 5,4 2,1 5,3 5,3 1,3 5,4 2,4 6,6 6,6 2,2 5,4 2,5 6,6 6,6 2,2 7,7 2,9 8,3 8,3 3,1 10,5 2,9 8,4 8,4 3,1 11,8 3,2 10,3 10,3 4,5 10,5 3,2 10,4 10,4 4,5 12,7 in mm 0,5 - 0,8 0,7 - 1,1 Taping Dimensions Size (DxL) w 0, A 0,2 B 0,2 P 0,1 t2 0,2 F 0,1 t1 0,1 4 x 5,4 5 x 5,4 6,3 x 5,4 6,3 x 7,7 8 x 10,5 8 x 11,8 10 x 10,5 10 x 12,7 12,0 12,0 16,0 16,0 24,0 24,0 24,0 24,0 5,0 6,0 7,0 7,0 8,7 8,7 10,7 10,7 5,0 6,0 7,0 7,0 8,7 8,7 10,7 10,7 8,0 12,0 12,0 12,0 16,0 16,0 16,0 16,0 5,8 5,8 5,8 8,4 11,0 12,3 11,0 14,0 5,5 5,5 7,5 7,5 11,5 11,5 11,5 11,5 0,4 0,4 0,4 0,4 0,5 0,5 0,5 0,5 in mm Soldering Profile (Aluminium Electrolytic Capacitors) Diameter w D 4; 5 6,3 8; 10 Polymer 14 1 18 1 25 1 25 1 50 1 50 1 50 1 80 1 in mm Allowable Range of Peak Temperature Size T (C) t (second) t 1 (second) O 4 ~ 6,3 O 8 x 10,5 O 10 x 10,5 250 240 235 90 90 60 40 30 30 For more details or Soldering Profiles of Radials or Polymer-Capacitors please contact our local Sales Offices. v2006.2 8 Direct Contact & Support: Jianghai Europe GmbH +49 (0)2151-652088-0 info@jianghai-europe.com www.jianghai-europe.com Part Number System Technical Specification Radial Type Dimensions for loose, long-lead type, (bulk) Order Code: LL L OD F L7 L 11 3 1 4 1,5 5 2,0 1,0 6,3 2,5 0,45 8 3,5 5 2,0 6,3 2,5 0,5 8 3,5 10 12,5 16 5,0 0,6 2,0 7,5 0,8 18 20 22 1,0 25 12,5 10,0 O d 0,4 aMax in mm Dimensions for Ammopack taping Order Code: FF (FD) Code Case Range OD 4~6 Dimensions F 0,5 2,5 P 0,1 12,7 A 8 13 18,5 3,5 12,7 Form L (max) H 0,75 Ho 0,5 13 18,5 - Ammopack Form A 4~8 7 17,5 Form B FF 5 ~ 6,3 13 18,5 16 12,7 B 8 22 20,0 5 10 22 18,5 A Form C 12,5 27 18,5 - 15,0 FD 12,5 27 18,5 - 25,4 C FF 16 ~ 18 27 18,5 - 7,5 30,0 in mm Dimensions for loose, short cut leads, (bulk) Order Code: CC (CB,CD,CE,CF) Straight Lead Bended Lead 2.5max Code I preferred CB 5,0 0,5 CC 4,5 0,5 CD 4,0 0,5 CE 3,5 0,5 CF 3,0 0,5 in mm Direct Contact & Support: Jianghai Europe GmbH +49 (0)2151-652088-0 info@jianghai-europe.com www.jianghai-europe.com v2006.2 9 |
Price & Availability of CD261XQX
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |